info_tfgrid/collections/farmers/3node_building/4_wipe_all_disks.md
2024-06-13 17:09:57 -04:00

3.2 KiB

4. Wipe All the Disks

Table of Contents


Introduction

In this section of the ThreeFold Farmers book, we explain how to wipe all the disks of your 3Node.

Main Steps

It only takes a few steps to wipe all the disks of a 3Node.

  1. Create a Linux Bootstrap Image
  2. Boot Linux in Try Mode
  3. Wipe All the Disks

ThreeFold runs its own OS, which is Zero-OS. You thus need to start with completely wiped disks. Note that ALL disks must be wiped. Otherwise, Zero-OS won't boot.

An easy method is to simply download a Linux distribution and wipe the disks by running simple commands on the command-line interface.

We will show how to do this with Ubuntu 20.04. LTS. This distribution is easy to use and it is thus a good introduction for Linux, in case you haven't yet explored this great operating system.

1. Create a Linux Bootstrap Image

Download the Ubuntu 20.04 ISO file here and burn the ISO image on a USB key. Make sure you have enough space on your USB key. You can also use other Linux Distro such as GRML, if you want a lighter ISO image.

The process here is the same as in section Burning the Bootstrap Image, but with the Linux ISO instead of the Zero-OS ISO. BalenaEtcher is recommended as it formats your USB in the process, and it is available for MAC, Windows and Linux.

2. Boot Linux in Try Mode

When you boot the Linux ISO image, make sure to choose Try Mode. Otherwise, it will install Linux on your computer. You do not want this.

3. Use wipefs to Wipe All the Disks

We will now use wipefs to remove all the data on the disks.

Important: Make sure that you have no important data on your disks, or make sure that you have copies of your disks before proceeding.

Once Linux is booted, open the terminal.

First, you can check the available disks by writing the command:

lsblk

The types of disk you can see are:

  • sdX
    • SATA type
    • e.g. sda
    • Note: It can be an SSD disk or a USB key
  • nvmeX
    • NVMe type
    • e.g. nvme0n1

SATA Disks

To wipe one specific SATA disk at a time, use the following command by replacing sdX with the specific disk (e.g. sdb):

sudo wipefs -af /dev/sdX

To wipe all SATA disks (except the Linux distro USB disk you are currently using to run Ubuntu in Try Mode), take note of the Linux distro USB disk (e.g. sdb) and replace sdX with it in the following line:

sudo for i in /dev/sd*; do if [ "$i"!= "/dev/sdX"* ]; then wipefs -af $i; fi; done

NVMe Disks

To wipe one specific NVMe disk at a time, use the following command by replacing nvmeX with the specific disk (e.g. nvme0n1) :

sudo wipefs -af /dev/nvmeX

To wipe all NVMe disks, use the following line:

sudo for i in /dev/nvme*; do wipefs -af $i; done